Measure & Install
hover to zoom. click to enlarge.

Masquerade Ball - Classic Overlapping Style

More sizes & fabrics | Made to measure

Masquerade Ball

Select Fabric
Width: 40   inch ?

For valance only, add 6 inches or more to the window width when you order; for a full set, add 10 inches or more (we recommend using two rods/poles). If the wall space is limited, use the width of the wall (subtract a few inches) as the width when you order online.

Height: 96   inch ?

This refers to the overall height of the window treatment. It is from where you want to hange the valance/curtains down to the floor. Feel free to add a few inches if you want a puddled look.

The height of a swag is usually around 1/5 - 1/4 of the overall height. The height of a tail (side cascade piece) is roughly twice the height of a swag.

Proceed to full customization
Full Set
$959 $564
1 valance, 40"W, fully lined, rod pocket.
2 panels, each 40"W x 96"H, fully lined, rod pocket".
Valance Only
$602 $365
1 valance, 40"W, fully lined, rod pocket.
Drape Only
$340 $170
1 panel, 40"W x 96"H, fully lined, rod pocket".

Custom order. Not returnable. Ship within 4-6 weeks.

08/11/24 to 08/25/24

Customized into different styles:


Indulge yourself with this decorative and ornate swag valance curtains in your living room, lounge or anywhere you desire to place it. Fabulous pattern reminds of a masquerade with blue feathers.

Full Set

  • 1 valance, measuring at selected width
  • 2 drape panels, each measuring at selected width and height 
  • 2 matching fabric tiebacks

Valance Only

  • overlapping style swags, fully lined
  • swag height around 1/4 of the total height
  • tail height around 1/2 of the total height
  • selected width
  • rod pocket (fits a rod up to 1.5'' in diameter)

Drape Only

  • 1 drape panel, fully lined 
  • selected width and height
  • rod pocket (fits a rod up to 1.5'' in diameter)


  • light gold polyester embossed with subtle English rose pattern 

Recommended measuring instructions

Width: order at least 6 inches wider than the window width if you want valance only; 10"-30" wider (if the wall space allows) than the window width if you want a full set. If the wall space is limited, use the wall width minus a few inches. 

Height: from where you want to hang the window treatment down to the floor

Easy Installation

It is as easy as installing any regular curtains except that you might want to use two separate rods. The rod for the drape panels will be installed slightly lower and inside the rod for the valance. Since both valance and drape panels have rod pocket on top, just slide the rods through the rod pockets and hang both rods onto the supporting brackets. Done!

Measurement guide for different window types

For rectangular windows, make sure to order window treatment that is wider and taller than your window, i.e. make sure the window treatment can fully cover your window. You can size up as big as the wall space allows.

6-inch rule: add at least 6 inches to the window width for each curtain rod you might use when you order online. For valance only or panel only, add 6 inches or more when you order online(one rod); for a full set, add 12 inches or more (we recommend using two curtain rods). If the wall space is limited, take the wall width (subtract a few inches) as the width when you order online.

Please refer to the measurement guide for more details.


For an arch window, you can treat it as a rectangular window and put the curtain rods over the arch or under the arch.

Measurement - Arch

Or you can estimate the arch width by 1.5 x window width and hang the valance along the arch line (holdback style).


For bay windows, you can simply treat them as three separate rectangular windows when ordering online.

Measurement - Bay

How to install a rod-pocket valance curtain set?

Measurement and Installation Guide

Instruction-window frame measurement 


When you order online, width refers to the valance width, and height refers to the curtain panel height.

We recommend using two single curtain rods of 1" - 2" in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall). The valance rod should be fixed wider, higher, and projected further away from the wall than the panel rod.

Curtain Rod Bracket Installation

Brackets Installation 

The brackets for the panel rod should be installed at least 3'' below and inside those for the valance rod. The same applies to the brackets for the panel rod to the window. This way, we can make sure the valance and the curtain panels can fully cover the window.

For example, if your window is 58'' wide and 80'' to the floor,you might want to order a full set of 84'' in height and 70'' in width. If you have enough wall space, you can go as wide as you like. The above is for your reference as to the minimum setback.

Valance and Curtains Rod Pocket Installation

Brackets Installation(side view) 

The brackets for valance rod should be at least 3'' longer than those for the panel rod. This way, we can leave some clearance between the valance and the underneath curtain panels.

Curtain Panel Rod Pocket Guide

Rod for Curtain Panels

Slide the panel rod through the rod pocket on the panels.  

Instruction-swags and tails curtain set

Panel Look

Hang the panel rod onto the lower rod brackets. 

Rod Pocket Valance Installation Guide  

Rod for Valance

Slide the valance rod through the rod pocket on the valance. 

Valance Curtain Rod Bracket Installation

Complete Look

Hang the valance rod onto the upper rod brackets. Shape the swags from the top side to the lower center in a "U" shape to smooth out the curves and folds. 

You are done! Enjoy your beautiful window treatment.

For valances of 80'' or wider, there will be an opening at the back of the rod pockets in case you need an extra bracket to support the rod.

Shipping & Returns

Shipping Policy: offers free UPS ground or USPS on all domestic orders. We try our best to minimize the handling time. The in-stock products usually ship within 1-2 business days. Custom orders usually take 4-6 weeks from the time of ordering to shipping, depending on fabric availability and specific requirements. If you like your order to be shipped outside US, please email for shipping cost.

Return Policy:
In-stock items can be returned to us within 20 days of receipt for full refund.

Custom (made-to-measure) items are not returnable as they are tailored to individual specifications, such as size, style, fabric and accessories.

Please contact us at for any return request.

Buyers will be responsible for the return shipping charges. Returns must be unused, in the state you received them, and in the original packaging. Any item not in its original condition, is damaged or missing parts for reasons not due to our error may not be eligible for exchange or refund. Any item that is returned more than 20 days after delivery might not be eligible for a refund either. 

Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, or online account for custom orders, within a certain amount of days.

If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at

 Email us  Message us  FAQ

* Send us your home photos through email or message for free design consultation

Scroll up to hide toolbars